41st National Narrow Gauge Convention

 The 41st National Narrow Gauge Convention will be held in Hickory, NC from September 1 through September 4, 2021.  As my layout is on the Layout Tour for the Convention, this has provided a deadline to bring the layout to a reasonably complete appearance.  Although I have been hosting operating sessions on the layout as it has developed, I have recently achieved the notable milestone that all of the benchwork, trackwork, and wiring have been completed!

Statistics can be entertaining, so here are a few for the layout:

                        1.  Track - 937 feet of Micro-Engineering Code 55 Flex-Track

                        2.  Turnouts - 126, 8 of which are stub turnouts (on the Enterprise Branch).

                        3.  Tortoise Switch Machines - 118

                        4.  Servo Switch Machines - 8 (on the Enterprise Branch)

                        5.  One NCE Command Station

                        6.  Radio Base Unit - 1

                        7.  Two NCE boosters

                        8.  26 UTP fascia-mounted panels

                        9.  NCE Cab bus - 254 feet

                        10.  Power Districts - 8

                        11.  PSX Circuit breakers - 8

                        12.  Reversing Sections - 6

                        13.  PSX-AR Auto Reversers - 2

                        14.  OG-AR Auto Reversers - 4

Scenery has also been progressing on the layout, and my wife, Patty, has been making trees while I have been working on track and wiring.  To date, she has made about 650 trees, which are now beginning to be distributed among the more completed scenes.

Patty and I hope that you will join us for the Narrow Gauge Convention in just a few short weeks!

Vance Junction Outbuildings

Three of the four outbuildings for my Vance Junction scene have been completed, with the converted passenger car remaining to be finished.  These buildings were built from Banta Modelworks kits, and finished similarly to the Vance Junction Section House previously described.  The roofs on all of these buildings are tarpaper, and were painted with my dwindling supply of Polly Scale Grimy Black.  These buildings are located on the hillside adjacent to the Section House.

The handcar shed and boxcar shed at Vance Junction.  This is the trackside view of these buildings.

The shed and lean-to at Vance Junction.  The disks serve to hold the building in position until the model is permanently installed at Vance Junction.  This is the rear, non-trackside view of the building.

Vance Junction Section House

I recently completed the Vance Junction Section House.  This building was built from a Banta Modelworks kit, and went together very well.  The building is painted using Star brand paints, available from P-B-L.  The colors used were Jersey Cream for the body of the building, with D&RGW Trim Brown for the trim.  The basement board-and-batten siding was stained with Hunterline Barn Red stain, and the weathered wood deck and railings were stained using Hunterline Creosote Black.

Rear view of the Vance Junction Section House.  

Rear 3/4 view of the Vance Junction Section House.

Front (trackside) view of the Vance Junction Section House.

Scatter Grip, the adhesive I used to attach the laser-cut shingles to the roof.  This adhesive is brushed onto the roof surface, and stays sticky for weeks.  This allows plenty of time to attach the shingles without concern that the adhesive will dry out before the shingling is completed.

Telluride Branch and Pandora

I have recently completed the Telluride Branch of the Rio Grande Southern Railroad, including the Pandora mining area.  The track plan for Telluride and Pandora was designed using Mike Blazek's Telluride and Pandora workbooks.

As with the rest of the layout, the track consists of Micro-Engineering Code 55 Flex Track.  There are 22 turnouts in Telluride and Pandora, all of which are handlaid using FastTracks fixtures.  Two of the turnouts are curved turnouts custom built to fit on the curves entering Pandora.

The turnouts are controlled, as on the rest of the layout, by Tortoise by Circuitron slow-motion switch machines.  Berrett Hill Easy Wire Tortoise Adapters ( click here) are used to simplify wiring.  Fascia-mounted Berrett Hill Touch Toggles are used for control.  

Wiring has been completed, and will be the subject of an additional post.  UTP panels have been installed in the fasica, although the layout is equipped with radio throttles.

A swing gate was installed across the bathroom doorway to connect Telluride to the rest of the layout, while still allowing access to the bathroom.  This will be the subject of a future post as well.

Overall view of Telluride.  Note the Raggs....to Riches Telluride depot.  The first train, headed by RGS  455 is leaving town.

The first train from Telluride is crossing the double deck swing gate .

The first train from Telluride is now leaving the swing gate, and is descending Keystone Hill, which on my layout is located above Placeville.